• Quality Products
  • Best Pricing
  • On Time Delivery
  • Small Quantity Specialist
  • Expert Color Matching
Call Us: 800.866.6470

Fax: 410.247.6583
E-mail: info@chesapeakebaycoatings.com


DEVTHANE™ 379UVA Aliphatic Urethane Gloss Enamel

White, ready-mixed & custom colors

Generic: Aliphatic Acrylic Polyurethane

General Description: A high performance, two-component chemically-cured aliphatic Urethane gloss enamel for use in areas where maximum gloss & color retention are required.

Typical uses: For use on properly prepared and primed steel, concrete or steel floors, masonry, drywall, plaster, metal, concrete block, galvanized, Aluminum, poured concrete, and glazed brick. Ideal for use on exterior or interior structural steel, piping, metal buildings, control cabinetry, conveyors, pumps, storage tank exteriors, motors, machinery, and transportation vehicles.

Item #: 379C0910,White (379K1000), ready-mixed & custom colors
Rating: Not Rated Yet
Color White (379K1000), ready-mixed & custom colors
Finish Gloss (90 units @60°)
Reduction Solvent T-9 or T-17 Thinner - see Thinning
Clean-Up Solvent T-9 Thinner
Weight / Gallon 11.0 lbs/gal. (1.32 kg/L) - varies with color
VOC 2.60 lbs/gal (311 g/L) - varies with color (EPA24)
Solids By Volume (ASTM 2697 - 7 days): 63% ± 2%
Theoretical Coverage at 1.0 Mil Dry 1011 sq.ft./gal. (24.9 m²/L) (25 microns)
Recommended Film Thickness 2.0 - 3.0 mils (50 - 75 microns) dry - 3.2 - 4.8 mils (80 - 120 microns) wet
Shelf Life Over 12 months at 77°F (25°C) - unopened
Mix Ratio By Volume 4 (base): 1 (converter)
Pot Life 4 hours @ 77°F (25°C)
Perfomance Data
Adhesion (ASTM D 4541) Excellent
Salt Spray Resistance (ASTM B 117) Excellent
Abrasion Resistance (ASTM D 4060) Excellent
Humidity Resistance (ASTM D 2247) Excellent
Exterior Exposure (45° South Florida) Excellent
Service Temperature Limits 250°F (121°C) dry
Hardness (ASTM D 3363) 7 day cure @ 77°F (25°C) - 4H
Chemical Resistance (ASTM D 1308 - 24 hr. Contact) Resists splash and spillage of alkalis, salts, moisture, oils, greases, foodstuffs and detergents.
Stain Resistance (ASTM D 1308 - 1 week contact) Excellent. Resists stains such as crayon, lipstick, coffee, soil medium, shoe polish, grape juice, ink pen, marker, and spray paint.


  • Exceptional gloss and color retention
  • Excellent abrasion and chemical resistance
  • Easily applied by brush, roller or spray
  • Wide color selection, including safety colors
  • Excellent resistance to marring, chipping, and scratching
  • Contains ultraviolet light absorber
Graffiti resistance:

Excellent resistance to most graffiti materials such as spray paint, magic markers and lipstick. Contact your ICI Paint's representative for more information on the graffiti removing cleaner to service your needs.

Limitations of use: Color may change as temperature approaches 250°F (121°C) limit, but the film will remain intact.

Minimum Dry Time
(ASTM D 1640): 2 mils (50 microns) DFT
Temperature 40°F (4°C) 60°F (16°C) 80°F (27°C) 100°F (38°C)
Minimum recoat 10 Hours 6 Hours 3 Hours 4 Hours
Dry hard maximum >32 Hours 24 Hours 16 Hours 12 Hours
Self 2 Weeks 2 Weeks 2 Weeks 7 Days

Ventilation, film thickness, humidity, thinning, and other factors can influence the rate of dry.


Please consult the appropriate system guide, the particular job specification or your ICI paints representative for proper systems using this product. Systems must be selected considering the particular environment involved.


The above table provides general guidelines only. Always consult your ICI paints representative for appropriate recoat windows since the maximum aged recoat time of this product may be significantly shortened or lengthened by a variety of conditions, including, but not limited to humidity, surface temperature, and the use of additives or thinners. The use of accelerators or force curing may shorten the aged recoat of individual coatings. The above recoat windows may not apply if recoating with a product other than those listed above. If the maximum aged recoat window is exceeded, please consult your ICI paints representative for appropriate recommendations to enhance adhesion. Failure to observe these precautions may result in intercoat delamination.


There are yet no reviews for this product.

© 2013 Chesapeake Bay Coatings. All Rights Reserved

1583 Sulphur Spring Rd., Suite 114 | Baltimore, MD 21227