• Quality Products
  • Best Pricing
  • On Time Delivery
  • Small Quantity Specialist
  • Expert Color Matching
Call Us: 800.866.6470

Fax: 410.247.6583
E-mail: info@chesapeakebaycoatings.com


MIL-DTL-53039 TY4 595-33446 (686 TAN)


An Aliphatic 1K haps free Chemical Agent Resistant coating meeting MIL-DTL-53039 intended uses provides visual and infrared camouflage to military vehicles and equipment. Resistant to chemical warfare agents and decontaminating materials.

Caution: This product is intended for industrial use only.

Item #: MIL-DTL-53039
Rating: Not Rated Yet
Mil-Spec Number MIL-DTL-53039
Color Tan 686A 33446 Fed Std. 595 Number
Max. Gloss @ 85 degrees 3.5
Volume Solids/td> 52.0 %
Weight Solids 68.8 %
Max. VOC 3.5 lb/gal
Min. Film Thickness DFT 1.8 mils
Theoretical Coverage @ 1 Mil Dry 835 ft²
Weatherometer Test Xenon Arc 300 hrs
Viscosity 65 - 70 KU
Weight per Gallon 10.8 lb/gal
Specification MIL-C-53039A Amend 2
Manufacturer Part Number N-8048
Application Information
  • Methods: Conventional spray, HVLP, airless, AAA

  • Mix ratio: Single component (1k).

  • Reducer: None. ready to spray. Special thinning with T-210 (MIL-T-81772B), its equivalent or Urethane grade thinner. Use of thinner will affect VOC and may cause paint to sag and run. PCBTF (Oxsol 100) may be used up to 20 % without affecting VOC.

  • Cleaner: T-210 or Urethane grade thinner

  • Shelf Life: 12 months in unopened container. Use within 8 hours after opening or see MIL-DTL-53072C for further info.

  • Dry Time: 30 min to touch, dry hard 3 hours (max.), dry through 4 hours (max.) 77°F, 50% RH

  • Time To recoat: Minimum flash dry between coats. No maximum recoat time for clean surfaces. Scuff sand and clean if needed.

  • Primers: MIL-P-23377, MIL-P-53022, MIL-P-53030, or MIL-P-85582

Surface Preparation

Surface should be clean of all grease, dirt, oil, rust and foreign material.

Safety Information

Consult the Material Safety Data Sheet prior to application for detailed information on the health and safety hazards.


This product must be stored in accordance with Local, State, and National Regulations.

Preferred storage conditions:
  • Indoors

  • Keep containers in a dry space with adequate ventilation

  • The containers must be tightly sealed

  • Handle with care

  • Shake well before use

  • Shelf life is 12 months from date of manufacture

Dry Time / Cure

May be force dried 20 minutes at 150°F (dry hard). Air dry times double for every 10° drop in temperature (approximate). Low humidity or high film thickness will also slow dry and cure time.


Mix with a paint shaker prior to use. Agitate material while in use. Ambient application temperature should be between 60° and 90°F. Best results with relative humidity above 10% and less than 80%. Application and use of this product is outlined in MIL-DTL-53072C, which should take precedence as a CARC processing guideline.


The information is supplied as a guideline to our customers. The user must be aware of the cleaning, pretreatment, application and testing requirements for their specific job.


There are yet no reviews for this product.

© 2013 Chesapeake Bay Coatings. All Rights Reserved

1583 Sulphur Spring Rd., Suite 114 | Baltimore, MD 21227