• Quality Products
  • Best Pricing
  • On Time Delivery
  • Small Quantity Specialist
  • Expert Color Matching
Call Us: 800.866.6470

Fax: 410.247.6583
E-mail: info@chesapeakebaycoatings.com


MIL-DTL-64159 TY2 595-34094 (383 GREEN)


A water reducible 2K Chemical Agent Resistant coating meeting MIL-DTL-64159 type II Polymeric base flattening agent.

Caution :This product is for industrial use only.

Item #: MIL-DTL-64159
Rating: Not Rated Yet
Mil-Spec Number MIL-DTL-64159
Color Green 383 34094 Fed Std. 595 Number
Volume Solids 36.51 %
Weight Solids 54.9 %
Min. Film Thickness DFT 1.8 - 2.0 mils
Weatherometer Test Pass
Viscosity 70 - 80 KU
Weight per Gallon 11.7
VOC 1.4 lbs/gal Mixed
Theoretical Coverage 758 @1 mil DFT Mixed, Unreduced
Salt Spray Test Primer Performance
Humidity Test Primer Performance
Max. Gloss @ 85 Degree Meter 3.5
Manufacturer Part Number N-8066A
Application Information
  • Methods: Conventional spray, HVLP AAA, airless, brush, roller

  • Mix ratio: Mix 2 parts N-8066A with 1 part H2OB activator mixture will thicken. Use up to 1 part water to dilute as desired to spray viscosity.

  • Reducer: Water

  • Cleaner: Water

  • Pot life: 4 hours @ 78°F, may decrease as temp increases, typical 2K

  • Dry Time: Air dry

  • Time to recoat: Minimum flash dry between coats. No limitations but cleaning and sanding may be required

Surface Preparation

Surface should be clean of all grease, dirt, oil, rust and foreign material which would be detrimental to the coating.

Safety Information

Consult the Material Safety Data Sheet prior to application for detailed information on the health and safety hazards.


This product must be stored in accordance with Local, State, and National Regulations.

Preferred storage conditions:

  • Keep containers m a dry space with adequate ventilation

  • Minimum temperature of 40°F and a maximum temperature of 110°F

  • The containers should be tightly sealed

  • Handle with care

  • Stir well before use

  • Shelf life is 12 months from date of manufacturing

Dry Time / Cure

Set to touch 15 - 30 min, dry through 2.0 hours max.


Use of a mechanical mixer is recommended Hand stirring will not adequately mix both components. Heavy wet applications over 6 mils wet may lead to blisters in finish film. DO NOT APPLY when ambient air temperature is less than dew point.


The information is supplied as a guideline to our customers. The user must be aware of the cleaning, pretreatment, application and testing requirements for their specific job.


There are yet no reviews for this product.

© 2013 Chesapeake Bay Coatings. All Rights Reserved

1583 Sulphur Spring Rd., Suite 114 | Baltimore, MD 21227