• Quality Products
  • Best Pricing
  • On Time Delivery
  • Small Quantity Specialist
  • Expert Color Matching
Call Us: 800.866.6470

Fax: 410.247.6583
E-mail: info@chesapeakebaycoatings.com

search

MIL-P-23377 TY1 CL 1 YELLOW

PDFPrintEmail
Description



Epoxy Polyamide, chemical and solvent resistant primer (2 component)



Component A - Contains epoxy resin, pigmented

Component B - Clear polyamide


Color: The admixed primers shall be characteristic of commercial grade Strontium Chromate Type 1 Deep Yellow.



Item #: MIL-P-23377
Rating: Not Rated Yet
Specifications
Type Class 1
Color The admixed primers shall be characteristic of commercial grade Strontium Chromate Type 1 Deep Yellow.
Viscosity Admixed 22 seconds (Maximum), #4 Ford cup
Gun Atomizing Pressure 45 to 55 lbs
Pot Fluid Pressure 10 to 15 lbs
Temperature 75 to 80 ºF
Reduction MIL-T-81772 Type 2
Topcoating Epoxy, polyurethane or alkyd enamel (for good adhesion topcoat within 24 hours)
Properties
VOC (lbs/gal) Component A 4.01
Dry Time Dry hard: 6 hours
Tack free: 1 hour
Weight (lbs/gal) 10.5 lbs
Solids by Weight (± 2) 58 %58 %58 %58 %58 %
Flash Point 21 ºF
Gloss 10° maximum 60° meter
Reduced 16 sec #2 Zahn at 78° F
Theoretical Coverage at 1 Mil Dry 572 ft²
Application

Thoroughly mix each component. Slowly pour Comp B into Comp A while stirring until a 1:1 volume is attained. Allow to incubate 30-45 minutes. Then thin admixed primer with MIL-T-81772 Type 2 to a viscosity of approximately 16 sec #2 Zahn Spray apply and allow 1 hour for air drying before application of the top coat.

Suggested equipment settings:
  • Gun atomizing pressure: 45 to 55 lbs.
  • Pot fluid pressure: 10 to 15 lbs.
  • Temperature: 75 to 80° F
Use

Chemical and solvent resistant primer for application to properly prepared Aluminum and Steel surfaces.

Reviews

There are yet no reviews for this product.

© 2013 Chesapeake Bay Coatings. All Rights Reserved

1583 Sulphur Spring Rd., Suite 114 | Baltimore, MD 21227